The most known methods to sprout your seeds and get your grow cycle going in no time. How to germinate cannabis seeds? In a cup of water, On a damp surface or In soil. My favorite way of germinating weed seeds is to put them in a cup of water. A step-by-step guide describing the best way to germinate your cannabis seeds. This germination method is ideal for the indoor and outdoor grower.
Germination Guide for Autoflowering Seeds
Seed germination is the first part of a successful grow cycle, to help you start your cannabis plants with the right foot, here’s an autoflower germination guide that can be used not only for cannabis but for tomatoes, mangos, strawberries. you name it!
Sebastian Good is talking about the best way to start your autoflower seed and germinates Strawberry Pie Auto.
So here’s how to germinate cannabis seeds with the best-known methods and a couple of tips that will get you harvesting in no time.
1. First Things First: Know the anatomy of your cannabis seed
The process of autoflower germination can take up to 10 days, in order to do everything correctly and know if everything’s going well, we need to know a little bit more about the seed. First of all, we need to understand the anatomy of a cannabis seed. The cannabis seed has a dark brown, hard, and often striped, shell, this shell is what protects the insides which are extremely fragile.
When germinating, we need to hydrate the seed, this will soften the seed’s shell and allow water to reach the embryo, when the water reaches it, the embryo will “activate” and start developing.
Have in mind that it’s possible to drown the seed, so we need to keep an eye on moisture levels, also making sure it doesn’t dry out. With a softened shell, it will be easier for the radicle to come out and this is when you’ll see the white taproot slowly appearing, and once it reaches 2-3cm, it’s time to plant it.
As soon as the seedling comes out of the medium, you’ll often see the shell stuck on top of the cotyledons, which are the tiny round leaves that you’re able to see once the shell has detached from the seedling. Those leaves are responsible for feeding the plant until the first set of true leaves appear. Also, there isn’t the best way to germinate marijuana seeds, you can do it any way you want, as long as you keep proper conditions, your seeds will germinate. So, if you’re wondering how do you germinate autoflowering seeds? Read along for the best methods.
2. The Best Conditions For Germinating Seeds
As you may know, cannabis plants need certain conditions depending on the stage they’re in, maintaining these conditions are the best way to ensure your plants will thrive, and when talking about seeds and germination, it’s no different.
Obviously, you can grow cannabis plants in less-than-ideal conditions and they will still grow but it may end up affecting the yields or quality of your harvest.
When talking about germinating auto seeds, germinating in less-than-ideal conditions will decrease the chances of sprouting, so unlike growing cannabis in bad conditions, which will still grow but can affect the harvest, germinating in bad conditions can end up killing your seeds. So when germinating autoflowers you should keep the temperature between 21-26°C and the humidity as close as 90% as you can.
3. Top Tricks For Germinating Old Seeds
As said above, germinating in the ideal conditions will guarantee successful germination but sometimes seeds may be old or have been kept in bad conditions and can be hard to germinate. So, to help you germinate old seeds, here are a couple of tricks that will increase the chances of germination. But first of all, you need to know the best conditions to avoid these problems.
How To Properly Store Seeds
If you are storing seeds for your next grow cycle, you need to keep them in ideal conditions. If you’re going to germinate them during the next couple of days there’s no need to do anything extra, other than keeping them in a cool place and in complete darkness but if you’re planning to store them for months or even years, you should keep them in the fridge.
You should keep your seeds in an airtight container in a fridge set at 6-8°C with a relative humidity of between 20-30%, if you can’t set your fridge to the temperatures mentioned, just keeping them in the fridge will increase the chances of germination. Just have in mind that the better the conditions, the longer your seeds with last.
Soak in supplemented water
As cannabis seeds get old, the shell hardens and can make it hard for the water to reach the embryo, and if the water doesn’t reach the embryo, your seeds won’t sprout so if you’re dealing with old seeds, you can soak them in supplemented water.
To do this, you can fill a glass cup with water and add around 30ml of hydrogen peroxide and leave your seeds soaking for 12hs, this should do the trick. You can also use germination boosters that you find in grow shops but usually, hydrogen peroxide works, also, make sure the water is around 22°C and it’s not getting direct sunlight.
Scarification is a method used to make ridges on the seed to help water pass through, to do this properly, you will need a piece of sandpaper but you can improvise and do it with a matchbox. The goal is to thin out the shell so that the water can reach the embryo easily, just make sure you don’t overdo it and end up harming the embryo inside.
Slightly Open The Seed
As you may have seen, the seed is made out of two halves and has a ridge around it, if your seeds are old, that ridge may end up hardening too much and the seed won’t sprout. So to help your weed seed germinate, you can use a knife or any other tool with a thin point to gently insert it in between the ridges and slightly separate it, after this process, you can soak your water and germinate it like you normally would.
4. Paper Towel Germination Method
The paper towel method is the easiest of all methods. You’ll need :
- 2 paper towels
- a plastic container or plates
Moisten the paper towels and wring them out so they’re damp but not completely wet.
Place the seeds on the paper towel, fold it over the seeds and place it in a plastic container, cover it with the lid to keep moisture in (can also use two plates instead of the plastic container, place the paper towel on a plate and use the other one to cover).
Place the container in a slightly warm and dark place. Remember to check on it daily, we must ensure the paper towels never dry out, the seeds need to keep absorbing moisture, it’s likely that the seeds will never germinate if they don’t. Sprinkle a little bit of water if needed, you’ll know they’re ready to be transplanted when the radicle is around 1-3cm long.
If the paper towel starts having a bad smell, it’s a sign of too much water, let it dry for a couple of days, and if the papers continue smelling bad, change the paper towels.
5. Soaking Overnight In A Glass Of Water
After many years of experimenting and looking for the best way to germinate our Fast Buds seeds, we must say that this is definitely one of the most effective ways.
This method is especially effective for seeds with a harder shell or older seeds. You’ll need:
As the title says, grab a glass cup and fill it half with water.
Place the seeds in the glass and leave it in a dark place, let the seeds soak for up to 32 hours.
Most viable seeds will sink after a couple of hours and you should see the radicle after a couple of days. Remember that some seeds may need longer until you see the radicle coming out. If they haven’t sprouted after 72 hours, add a few drops of hydrogen peroxide to kill accumulated bacteria in the water and return to the darkness for 2 more days.
6. Using A Germination Chamber
When you get a bit more experienced, you’ll wanna look for more professional tools and the germination chamber is one of them. It consists of a plastic base with small square cells (can come with up to 256 cells, each cell supports 1 seed), on top of a heat mat, also comes with a humidity dome, basically looks like a small greenhouse. They’re very cheap and you can make one at home.
The chamber can be used with any type of medium, Rockwool cubes, peat pellets, coco fiber, perlite, or even soil and they keep the best environment for sprouting seeds and the first days of the seedling.So how to germinate a marijuana seed in a germination chamber? To start germinating, make a small hole (1-2 cm) in moisten medium, cover without applying pressure, turn on the heat mat and spray the humidity dome, it should take a couple of days to see the seedling coming out.
7. Rockwool Cubes And Peat Pellets
Rockwool cubes are small cubes made of rock and sand fibers, with the consistency of cotton candy almost, they absorb a lot of water and usually are used for germinating seeds and clones. Using them along with the germinating chamber has an advantage, being easy to transplant to the next medium or container.
Rockwool and peat pellets are an easy way to germinate seeds but can be easier to overwater your seeds.
They also can be used along with clay pellets in hydroponics. One of the bad aspects of Rockwool cubes is you can easily overwater and get root rot. Peat pellets are similar to the Rockwool cubes but are made of compressed peat moss and come in a small disc shape. To germinate in either one of them, we will use the same technique explained before, moisten the Rockwool or peat pellet, make a little hole (1-2cm) and place the seed inside, cover it gently without applying pressure and you’re all done. You can place the pellet or cube directly in any type of medium or hydroponics chamber, after sprouting, the roots will continue to grow down, even if they reach the end of the Rockwool or peat pellet.
8. Planting Directly In Medium
Sometimes the simplest way is the better way. As it happens in nature, we can also sprout our seeds in our medium of your preference (coco, soil, perlite, etc..) Just grab a pencil, or even with your fingers, make a little hole (1-2cm deep), and place the seed in it, the medium must be moist but not soaking, then cover with soil without applying pressure.
Every time you transplant a seedling, it needs some time to readjust and can cause stress, thus one of the biggest benefits of this method is you don’t have to worry about damaging your seedling when transplanting or shocking it because it already is in its final place.
9. Top Tips to Improve Seed Germination
Planting the Seeds Correctly
Cannabis seeds have an oval shape with one of the ends being sharper while the other has an indent known as the crown. When germinating cannabis seeds, it’s recommended to plant the seed with the crown pointing upwards as this is the end where the cotyledons usually come out from.
Don’t Let the Substrate Dry Out
The germination process relies on moisture to activate the biological processes that provide the energy the seedling needs to break through the seed shell and start growing. This means that the more moisture absorbed, the better. Note that the keyword here is moisture, you definitely don’t want to drown your seeds. Anyway, once the seed is in the paper towels and the germination process has begun, make sure to check regularly to ensure it’s still moist, and to help with this, it’s recommended you keep it in a warm damp place.
For better germination rates, you can opt for a heating mat and/or germination chambers, but it really doesn’t matter if you’re germination your seeds in the soil, jiffy’s, Rockwool cubes, paper towels, etc… Make sure to keep the substrate moist and you will have great results.
Planting the Seed at the Right Depth
One of the bigger issues among beginner growers is planting the seed at the right depth. These problems can get worse if you are watering the substrate after the seeds are planted. Remember, burying the seed too deep can cause it to not develop while not burying deep enough can cause the taproot to over-bend and develop a weak stem, and sometimes stunt growth.
This is why we recommend burying the seed at around 2 cm deep. You can do this by using a ruler, marking the 2 cm mark on a straw, or any other utensil that allows you to do this. Then plant your seed and cover it with the substrate without pressing too hard.
Avoid Planting several Seeds in the Same Pot
Sometimes you may not have enough substrate or pots, typically, this is when you would plant multiple seeds in the same container but they usually do not develop correctly due to several reasons. Now yes, you’re saving space and substrate but you’re definitely not helping your plants thrive as first of all, the roots need enough space to grow, and germinating in the same pot can cause the roots to fight for space.
Apart from fighting for space, if all the seedlings make it to the vegetative stage, they will continue competing for light and by doing this, you will not get the most out of each plant. Lack of light can also cause the stem and branches to grow weak which can cause problems during flower so make sure to plant one seed per pot unless you’re growing in 100-200L or bigger raised beds.
10. In Conclusion
There’s no such thing as the best way to germinate marijuana seeds, a successful germination is considered when you see the first leaves, known as Cotyledons, cannabis seeds germinate correctly with relatively high temperatures and humidity. To successfully reach the flowering stage you’ll have to use different techniques, not only for sprouting but to keep the plant happy and healthy until harvest.
Whether deciding which germination method to choose or getting ready for your first successful grow setup, our advice for beginner growers will be to start with autoflowering strains. If you look for something easy, quick, and easy to maintain, like Zkittlez Auto and Gorilla Glue Auto, there’s nothing better than choosing to grow autoflowers.
first time ever growing and got some amazing colors from this strain with low temps ran it at about 58-64 for 2 weeks and got this color
Germination of Cannabis Seeds
You bought beautiful Premium Pro Seeds from Suzy Seeds and of course, you want to get started. First, you have to germinate the seeds. Below, I will discuss my favorite way how to germinate cannabis seeds extensively, but also suggest other good methods. Suzy Seeds exclusively sells feminized cannabis seeds, so you don’t need to remove male plants, which applies also to autoflower cannabis seeds. It’s good to know that a cannabis seed does not need light to germinate. What is important, though, is a humid environment and an ambient temperature of around 20 °C. In general, there are three ways to germinate cannabis or marijuana seeds:
– In a cup of water
– On a damp surface
– In soil
How long does it take cannabis seeds to germinate in general? Or how do we germinate autoflowering seeds? The time of germination of marijuana seeds depends on the method of germination we apply, but autoflowering seeds germinate in the same way and time as feminized or regular cannabis seeds.
My favorite way to germinate the seeds is to put them in a cup of water and then between a damp paper towel or tissue. This goes well in 99% of the cases. That is why I will more extensively describe this first way.
We recommend not to touch the seeds or the seedlings with your hands. If you do anyways, make sure your hands are clean and if possible use plastic gloves.
Suzy’s Tip: Try your germintion method on a couple of seeds (maximum 3). This way, you can test if your method works well. Often a wrong germinating method is used and the seeds don’t germinate. Do you want to germinate your seeds in a different way? Continue reading.
Germinating cannabis seeds in a cup of water
Maintain an ambient temperature of at least 20 °C, otherwise, the seeds will not or at least not optimally germinate. Use a clean room and area for the germination process. Fill a cup with water and put the cannabis seeds in it. After 3 to 5 days, the seeds should pop open and a tiny root should come out.
As soon as the sprout is 2 to 3 mm, you can carefully get the seeds out of the water and plant them in the soil. Planting the germinated seed has to be done with lots of care and attention. Put them 0.5 to 1 cm in the soil with the root down. This way, the root (the white sprout) will more easily grow downwards.
Germinating cannabis seeds on a damp surface
Maintain an ambient temperature of at least 20 °C, otherwise, the seeds will not or at least not optimally germinate. Put the cannabis seeds on a surface that holds moisture, like wadding, paper towel or tissues on a saucer. Moisten the surface well, but avoid making it too wet. The moisture evaporates quickly at room temperature, so check during the period that the seeds will germinate if the surface is still damp enough.
You can also cover the seeds with damp wadding or tissues and another saucer on top. Because of the moisture that gets into the seeds, they are activated and start to germinate. As soon as the germ is 2 to 3 mm, you can carefully get the seeds out of the water and plant them in the soil. Put them 0.5 to 1 cm in the soil with the root down. This way, the root will more easily grow downwards.
Germinating cannabis seeds in soil/compost
Direct germination of marijuana seeds in the soil is a commonly used method. You don’t have to handle the fragile plant, so it is not disturbed in its growth process. However, the chances that the seeds will germinate are lower than when applying the other methods. When using this method, it is important to use good soil. You can inform yourself about the different types of soil at your local grow shop. Maintain an ambient temperature of at least 20 °C, otherwise, the seeds will not or not optimally germinate. Put the cannabis seed about 1 cm deep in the soil. Cover the hole with some soil and gently press.
The soil needs to be light so that the plant can easily grow to the surface. Solid soil is hard to penetrate for the roots and will cause a delay. The weed seeds will germinate under the ground and will come to the surface after 4 to 10 days. There are also more germination methods that can be applied.
How to Germinate Cannabis Seeds
Germination is the beginning of your cannabis seeds’ life and is easy to master. At this crucial stage, seeds grow and sprout into young seedlings. The best genetics deserve the best start, and all you need is two plates, some paper towel, and water. Apply the best germination method today and enjoy a great harvest.
1. Germination set-up
Prepare the first plate by lining the inside surface with two to three layers of damp paper towel. Drain excess water from your plate.
Place cannabis seeds on the top surface of the damp paper towel. Approximately three per plate; ensure they are not touching but are evenly spaced apart.
Add only a few layers of damp paper towel on top of the seeds, and let any excess water drain from the plate. Too much water lowers the chance of successful germination.
To complete the set-up, place the remaining plate upside-down and on top of the first plate, resembling pearls inside a clam.
Cannabis seeds need a dark, warm, and humid atmosphere to germinate.
Around 21°C (70°F) is perfect. Check the paper towels every second day and if required, spray with water to keep conditions moist for your seeds.
After a few days, tiny roots will begin to emerge. Congratulations! Your seeds have survived their first stage of life. Don’t worry if some of your seeds have not yet changed, they may just need a little more time as germination can take up to 14 days.
3. Plant of the seeling
Once the roots are a few millimetres long, they are ready to be delicately transferred to a small container filled with your growing medium of choice (rockwool, coco-fibre, or soil).
Make a hole in the growing medium that is 2 – 5 mm deep. Use tweezers or your fingers to transfer germinated seeds gently into the hole (root pointing down) and lightly cover with a fine layer of your medium. Do not pat it down too hard. The stem and the first tiny set of leaves, called cotyledons or ‘seed leaves’, should begin to emerge 24 to 72 hours after the seeds are planted.
4. Supplying a light source
Seedlings must be exposed to sunlight once they sprout. Ensure this is a gradual process as too much heat causes stress and will stunt growth.
Find a sunny place where you can begin to increase sun exposure, such as a windowsill. Ensure sun exposure is increased by an hour or so a day.
For an indoor plant you can use a fluorescent light (keep normal distance from bulb) or HID lighting (50-80 cm from the bulb).
Take care in the first week or two, as seedlings are still quite delicate and sensitive to the elements. They won’t need a lot of attention until the vegetative stage so avoid overhandling.
Germination is the beginning stage of the growing cycle, and this easy-to-follow guide gives your premium genetic cannabis seeds the best start to life. Whether you are a first-time home grower or a well-seasoned gardener, share your experience or any questions in the comments down below, as well as your tips and tricks!
Sensi Seeds CBD: Seeds, Oils, Capsules — How They’re Made
Laws and regulations regarding cannabis cultivation differ from country to country. Sensi Seeds therefore strongly advises you to check your local laws and regulations. Do not act in conflict with the law.
22 thoughts on “How to Germinate Cannabis Seeds”
Hi, Once seeds have sprouted, how long can or should you leave them to grow under 24 hr lights before moving to your outdoor garden?
Good afternoon Ken,
I hope you’re having a great day.
For the vegetation process, a light schedule of 18 hours of light, and 6 hours of darkness is preferred. Many growers get plants acclimatized to outside by placing them in a window, or under direct sunlight for a few hours a day.
Thanks again, and have a great day!
Hello everyone, all these suggestions are wonderful but I think a lot of you make it sound a little overwhelmingly. I’ve been very successfully cultivating for decades and I’ve always just placed my seeds, be it 1 or 100, in between 2 folded sheets of tissue which I’ve made wet with tap water. I then place them on a tray or plate in a warm dark area , such as an airing cupboard and leave for how ever long they take usually, 12 to 24 hours. The ONLY thing I do which takes effort is PH balance the water I germinate them in and I’ve only lost 5 seeds in nearly 40 years .
Good afternoon Paul,
I hope you’re having a good day,
Thanks for sharing your experiences with germination. pH balancing is a great tip You also might be interested in our new Jamaican Pearl Feminized Grow Report
Thanks again, and I hope you continue to enjoy the blog,
I lightly score my seeds by shaking them inside a rolled up piece of sandpaper – sandpaper side on the inside before leaving them in a cup of water for a few hours to hydrate. I then place them between wet (good quality) paper towel per instructions above. I find using an old plastic takeaway container with a heatmat below keeps the humidity high and with good end results.
Good morning Jonny,
Thanks for sharing your methods for germination with us, the heat mat and low-humidity are great tips!
Thanks again, and I hope you continue to enjoy the blog,
I have found out that the best and fastest way is to take a glass of clean/filtered water and place the seed right on top of the water (floating – NOT immersed in it!). If the seed is viable it will sprout in no more than 48 hours. Right after that you plant it in your pot/soil etc and you’re done.
Good morning Mary Jane,
Thanks for your support, and for sharing your experiences with germination!
You might also be interested in our article on The Life cycle of Cannabis: From seed to harvest.
Have a great day!
What happend if they sink I had em sink they came out fine
Are you saying they sprout in the glass of water and don’t “drown”?
Take aluminum foil flatten it out and put on top of your dirt it detects planes and grow it just like a tomato plant
Good morning Tammy,
Thanks for getting in touch with Sensi Seeds, and sharing your germination method with us!
Thanks again, and I hope you continue to enjoy the blog.
With best wishes,
Detects planes? Like magnetic? I’ve always has best success 24-48 hours soaked In water, spring water if possible. Usually do this in a shot glass, once they pop I’ll take a paper towel fold so it’s 2 layers then fold once more so you know where center is. Dump the seed in the middle of the edge and the true center (reason we folded a 2nd time)as well as the water just enough to saturate the paper towel. Do not soak! Carefully with the seed in the middle using sterile tweezers turn so the tap is growing down. This will prevent circling and tangling if doing multiple seeds. Now you can fold the other half so your seed will be “sandwiched” between 2 layers. At this time carefully take a corner and the waters attraction should keep your paper towel from unfolding but just in case be gentle. Holding it from 1 corner you can dangle it over a cub or the original shot glass so any extra water runs off. Now take a standard zip or press n seal sandwhich bag and slide your napkin in Carefully . REMEMBER which way was down! Work the air out making jt flat snd seal. Find a temperate dark area around 70°. A cabinet works we’ll as your going to prop it up with taproot facing downwards. Now just close it up and wait in 24-72 hours checking once a day. In rare cases you could have a 1/2″ tap root in the first 24 hrs some may take 4-5 days. Once the tap is about 1/2″-3/4″ long its ready for transplant into its first small pot. With this paper towel method I typically have 100% success.
Can you leave your seed to develop longer roots in the germination phase and can this make them better to grow or is a big no no?
Last year, I had 2 seeds that had really long roots with lots of secondary roots coming out when they were planted, one of which died after a couple of weeks and the other grew into a huge plant.
The other two seeds only had a short germinated growth and both died almost immediately after planting so not sure what I can learn from this…lol
Appreciate any thoughts and advice
Unfortunately, legal restrictions mean we can’t answer grow-related questions or give grow advice on this blog. However, other readers of this blog will often answer questions like yours.
Please check out the following articles on our blog which I think you may find of use, and I hope you continue to enjoy the blog!
With best wishes,
How often do you water and how wet should the plant be? Please.
Also if they are outdoor plants do you need to keep them covered with clingfilm for a wee while or do you just hope for the best. Thanks
This article, about how to water cannabis plants, should answer your questions. I can’t help you with the clingfilm one though, as it depends on the climate. Good luck, and happy gardening!
With best wishes,
Just drop the seeds in water, they will sprout , don’t have to use a towel and check it all the time , drop it in the water , let it float then it will sink and the root will grow out ,let the root get 1/4 inch and plant it where it’s going to grow , 8 hours sunlight starting as soon as it is out of the soil. Always grows great , don’t have to transplant from cup to gallon to bigger and bigger , if it’s growing outside put it where it stays , always does just fine.
Good afternoon Graham,
Thank you so much for sharing your experiences with germination.
Thanks again for your comment, and I hope you continue to enjoy the blog.
Have a great day!
I recommend this article to all breeders and cultivators who plans to germinate seeds and to some who don’t know how to germinate seeds, this article has the best and perfect ways on how to do it.
I have large bay windows at my condo which get about 11-12 hours of light per day. They are tinted but warm. I grow other indoor plants there perfectly. Is an ok place for my pot plants?
This sounds like a great place for all kinds of plants! I recommend you have a look at autoflowering varieties, as otherwise light pollution may negatively affect the flowering cycle. Good luck, and happy gardening!
With best wishes,
Leave a Comment Cancel Reply
The Sensi Seeds Editorial team has been built throughout our more than 30 years of existence. Our writers and editors include botanists, medical and legal experts as well as renown activists the world over including Lester Grinspoon, Micha Knodt, Robert Connell Clarke, Maurice Veldman, Sebastian Maríncolo, James Burton and Seshata.